Graco TrueCoat Sprayer 360 VSP and Parts
Collection: Graco TrueCoat Sprayer 360 VSP and Parts
The Graco TrueCoat 360 VSP is a professional-grade handheld paint sprayer engineered for residential and light commercial applications, delivering consistent finish quality on interior walls, trim, and cabinets. This collection supplies both complete sprayers and replacement parts—tip kits, o-rings, packing seals, FlexLiner bags, and support cups—to keep your equipment running at peak performance. Whether you're purchasing a new graco 360 paint sprayer or sourcing graco truecoat 360 parts for maintenance, we stock original Graco components that ensure reliability and spray consistency. The VSP (Variable Speed Pump) technology adjusts flow rate on demand, reducing material waste and extending fluid hose life. Contractors and facilities managers choose the TrueCoat 360 for its portability, ease of cleaning, and ability to handle latex and oil-based coatings without sacrifice.
How to Choose the Right Graco TrueCoat Sprayer 360 VSP and Parts
- Confirm fluid type compatibility: latex, oil-based, or hybrid acrylic formulations supported by your model.
- Verify tip size and spray pattern: standard, wide, or fine finish tips for surface and project scope.
- Check packing o-ring and valve seal material: Viton for aggressive fluids, standard rubber for standard coatings.
- Assess FlexLiner bag capacity: 35 oz or 42 oz packs for run length and refill frequency on job site.
- Confirm pump pressure rating: matched to viscosity and desired atomization for your material.
- Evaluate hose length and weight: handheld models benefit from shorter runs and balanced support cups.
- Review cleaning and storage kits: Pump Armor and startup kits reduce downtime and fluid degradation between jobs.
Model Comparison
| Part/Component | SKU | Primary Application | Material / Type |
|---|---|---|---|
| TrueCoat 360 Tip Kit | Graco 17A223 | Spray pattern adjustment and material flow control | Tungsten carbide / elastomer |
| Viton Packing O-Ring (Inlet Valve) | Graco 115719-015 | Inlet valve seal for aggressive or oil-based coatings | Viton fluoroelastomer |
| FlexLiner Bags 42 oz (3-pack) | Graco 17F005 | Fluid containment and disposal on VSP 360 models | Flexible plastic liner |
| Support Cup, TC/VSP360 | Graco 17D850 | Reduces arm fatigue and stabilizes handheld spray gun | Reinforced polymer |
| Handheld Lid Replacement Kit | Graco 17B636 | Paint container sealing and pressurization | Plastic lid assembly with gasket |
Frequently Asked Questions
What is the difference between standard O-rings and Viton packing o-rings in the TrueCoat 360?
Standard rubber o-rings work for latex and water-based coatings. Viton (fluoroelastomer) seals resist chemical degradation from oil-based, lacquer, and enamel fluids. Use Viton (SKU 115719-015) when spraying aggressive solvents; standard for latex and acrylics. Improper seal material causes leakage and premature wear.
How often should I replace the tip kit on my Graco 360 paint sprayer?
Tip wear depends on material sprayed and usage frequency. Replace the TrueCoat 360 Tip Kit (17A223) when spray pattern becomes uneven, consistency drops, or atomization degrades. Abrasive primers and fillers accelerate wear; inspect tips monthly under heavy use and replace annually in standard conditions.
Can I use 35 oz and 42 oz FlexLiner bags interchangeably on the VSP360?
Both fit the VSP 360 fluid container, but 42 oz bags (SKU 17F005) extend spray run time by ~20% versus 35 oz packs. Choose based on job site refill convenience and project scope. Always use genuine Graco FlexLiner bags to ensure proper seal and prevent leakage into the pump assembly.
What does the Pump Armor storage kit do, and when should I use it?
Pump Armor is a preservative fluid that displaces water and residual paint from pump and valve assemblies during storage or transport. Use it when the sprayer will sit unused for more than a week, or between season transitions. It prevents crystallization, corrosion, and stuck valves—critical for extending equipment life.
Is the Support Cup (17D850) necessary, or is it optional equipment?
The Support Cup (SKU 17D850) is optional but highly recommended. It stabilizes the handheld spray gun during extended use, reducing operator arm fatigue and improving spray consistency by minimizing gun drift. Essential for cabinet and trim work requiring precision and comfort over multi-hour shifts.
- Page 1 of 3
- Next page