Feel free to call or chat with us for recommendations.
Flat rate of $12.50 for orders below $500.
Click here for more info.
Provide emergency pressure venting in the event of a fire to avoid drum failure and catastrophic consequences. All safety drum vents automatically relieve pressure between 3 and 8 psi (30 to 55kPa) and include a flame arrester to absorb and safely dissipate heat. Valve within the vent is tested to allow 61 cubic inch (1-L) of water through a 3/8-in (9.5-mm) pipe nipple in less than 6 seconds for vacuum relief during drum dispensing operations. Vacuum relief permits smooth liquid flow and prevents possible drum collapse and leakage. Vacuum relief is automatic on vertically-installed vents and manual on horizontally-installed vents.
Safety fill vents and funnels fit the 2-in (51-mm) bung on a vertically-stored drum. The brass vent provides automatic pressure and vacuum relief, and includes a brass cap with safety chain tethered to the vent to prevent misplacement or loss. Remove cap during drum filling operations. Model no. 08211 includes a 9-in(229-mm) wide polyethylene funnel to facilitate solvent waste disposal and reduce spillage. Keep vent capped in closed position after filling operations to prevent flammable vapor from escaping. Six-inch (152-mm) flame arrester safely dissipates heat and prevents flashback from external ignition sources.
Additional Specs
| International Model No.: | 08102 |
| Material Specifications: | Brass |
| Dimensions, Exterior: | 3"D x 4.25"H |
| Diameter, Inch: | 3" |
| FM Approval: | Yes |
| NPS/NPT inch: | Both |
| NPS/NPT mm: | Both |
| Net Weight, lbs: | 2.0 |
| Net Weight, kg: | 0.9 |