Jet Tools - J-7040M-4, 10" x 16" Horizontal Mitering Bandsaw

FEATURES:
• Mitering head swivels to cut any angle 0° - 45° while the work piece remains secured
• Swing away control panel houses major saw controls
• Variable speed drive system allows the operator to easily fine tune the blade speed
• Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
• The blade rides on two load bearings mounted on a pivot shaft with the side bearings and carbide pads assisting in distributing the load equally
• Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
• Heavy-Duty transmission utilizes hardened and ground gears operating in an oil bath
• Cast Iron blade wheels
• Coolant system
• Adjustable material stop

SPECIFICATIONS:
• Bed Height (In.): 25-1/2
• Blade Length (In.): 135
• Blade Size (In.): 1 x .035 x 135
• Blade Speed (SFPM): 100 - 350
• Blade Wheel Diameter (In.): 14
• Cutting Capacity (W x D) (In.): 10 x 16
• Drive: Variable Speed
• Head Movement (Deg.): 45°
• Motor (HP): 2 HP, 460, 3Ph
• Rectangle at 45 Degrees (In.): 8-1/2 x 9
• Rectangle at 90 Degrees (In.): 10 x 14 and 2 x 16
• Round at 45 Degrees (In.): 8-1/2
• Round at 90 Degrees (In.): 10
• Vise Swivels (Deg.): 45°
• Weight (Lbs.): 924
• Overall Dimensions (L x W x H) (In.): 76 x 30 x 48
• Prewired Voltage (V.): 460