T34025 5-pack of 3" x 79" Silicon Carbide Sanding Belts–40-Grit

40-grit replacement sanding belts for your knife grinder.

Made with premium Silicon Carbide abrasive grains, the T34025 40-Grit 3" x 79" Sanding Belts are a great choice for grinding, shaping, and maintaining sharp metal edges.

Silicon Carbide abrasive is known for its exceptional ability to produce smooth and consistent results in polishing, grinding, and intricate detail work. It's also commonly used for sanding non-ferrous metals, plastics, and composites due to its heat resistance and low clogging tendency.

A 40-grit sandpaper is a coarse abrasive with large abrasive particles, designed for aggressive material removal and leveling uneven surfaces.

It is important to sequence your sanding from a lower number to a higher number without bypassing more than one grit. Doing so may not remove the marks from the rougher grit.

The 3" x 79" size is ideal for use on knife grinders–especially on the Grizzly G0489 G0952 and the G0972.

Within the belt thickness rating system, the X-weight backing extremely heavy-duty cloth is used for tough application.

Built to last, the added strength of this backing ensures that the belt stays in place and doesn't wear out too quickly, even with heavy use.

The combination of a robust backing and aggressive abrasive grains makes it suitable for removing material quickly and efficiently.

These belts can be run in either direction and are flexible for easy contouring and shaping of your knife edges.

The Grizzly Customer Service and Technical Support Teams are U.S.-based.

Additional sanding belts are available both online and in store and are shipped from both Grizzly warehouses in Springfield, MO and Bellingham, WA.

Made in the USA

SPECIFICATIONS:

• Grit: 40
• Size: 3" x 79"
• Quantity: 5
• Paper weight: X
• Abrasive grain: Silicon carbide

FEATURES:

• Full resin bond
• Bump free tape seam
• Runs in either direction