FREE Shipping On Order Over 80$

Grizzly Industrial 20-3/4" Gearhead Drill Press With Cross-Slide Table
Grizzly Industrial 20-3/4" Gearhead Drill Press With Cross-Slide Table

Grizzly Industrial 20-3/4" Gearhead Drill Press With Cross-Slide Table

Regular price
$9,852.00

See Lower Price in Cart

Quantity must be 1 or more


G0808 20-3/4" Gearhead Drill Press with Cross-Slide Table
When you want a money's-no-object drill press for your shop.
The innovative G0808 20-3/4" Gearhead Drill Press with Cross-Slide Table came about as a personal project of the CEO of Grizzly Industrial.

Shiraz wanted the convenience of a gearhead drill press with variable-speed, combined with a cross-slide table with longitudinal and vertical power feed.

Geared drill presses are designed for drilling larger holes than belt driven machines thanks to the spindle bearings and tighter tolerances.

The variable speed range between 0–2500 RPM is controlled by spindle speed dial and a high/low spindle speed lever. Low RPM speed is vital to drilling metal.

He also sought features like a digital spindle speed readout, long spindle throw, coarse and fine downfeed controls, and forward/reversing ability.

This had not been done before, so several meetings were held with engineers, special parts were made, and voila! A variable-speed gearhead drill press with X- and Z-axis table powerfeed, was created!

Like all Grizzly drill presses, the G0808 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects.

The G0808 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your drill press.

The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts fmay be available online and shipped from the Grizzly parts warehouse in Springfield, MO.

Made in an ISO 9001 factory

FEATURES:

  • Variable-frequency drive for 3-phase speed control with single-phase power
  • Longitudinal power feed on precision-ground cast-iron table
  • Power feed or hand crank-enabled rack-and-pinion table elevation
  • Coarse and fine downfeed controls
  • Cast-iron base with two 1/2" T-slots, 8-7/8" on center
  • 360° table and head positioning around column
  • Digital spindle speed display
  • Front-mounted e-stop button
  • Forward/reverse spindle switch
Main motor:  1-1/2 HP, 220V, 3-phase, 5.5A
Required power supply:  220V, single-phase,15A
Swing:  20-3/4"
Spindle taper:  R-8
Spindle travel:  4-7/8"
Spindle speed:  Variable, 0–2500 RPM
Drilling capacity:  1-9/16" Mild steel
Head tilt:  30° left, 90° right
Max distance spindle to column:  10-7/16"
Max distance spindle to table:  17-1/2"
Table dimensions:  7-1/2" x 23"
Quill diameter:  2-15/16"
Drawbar thread size:  7-16"
Drawbar length:  16-5/16"
Longitudinal table travel (X-axis):  15"
Cross table travel (Y-axis):  7"
Vertical table travel (Z-axis):  17-3/4"
T-slots size:  1/2", 4 table, 2 base
Overall dimensions:  42" W x 46-1/2" D x 77-1/2" H
Approximate shipping weight:  739 lbs.









;

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods

1-1/2 HP15 amp220Vaodd discountbf2023canadadrillFloormap pricemap priced itemnot canadapmax ad drill pressROAS 6.6Ship6to9daysspo-defaultspo-disabledspo-notify-me-disabledVariable-speed