Graco MTA755 5.5 kW SEW Motor Assembly Kit (for P-30 HT)

Genuine Graco MTA755 is the complete 5.5 kW SEW motor assembly kit for the ToughTek P-30 HT pump (25M032). It is the full motor assembly; the motor-only kit is MTA766.

Features

• 5.5 kW SEW motor assembly
• Complete assembly including motor flange adapter, auger/pump adapter and motor harness (120 in.)
• For the P-30 HT (25M032)
• Motor-only kit is MTA766

Fits These Graco Models

• ToughTek P-30 HT Series pump (25M032)

What's in the Kit

• 1 x MOTOR, gearbox, 5.5 kW, sew-Euro 124
• 1 x ADAPTER, motor, flange (MTA019)
• 1 x SEAL, grease, shaft, motor
• 4 x PIN, 3/16 diameter x 3/8 dowel
• 1 x FLANGE, motor, machined
• 1 x FITTING, zerk, grease, 1/4-28 unf (115278)
• 4 x SCREW, flange, hex, 5/16-18 x 1.25
• 1 x KEY, custom, sew (MTA363)
• 1 x SPACER, custom, sew (MTA364)
• 1 x ADAPTER, auger/pump (MTA014)
• 2 x SCREW, set 1/4-20 x 0.25 soc cup
• 1 x FITTING, cbl, strain relief, 3/4 npt
• 1 x HARNESS, motor, 120 in. (MTA783)

Where It Is in the Graco Manual

• Item 2, page 27 of Graco manual 3A4361 (highlighted in the photo above)
• page 33 of Graco manual 3A4361 (3A4361L 33 MTA755 (for P-30 HT) WL)

Other Parts on the Same Graco Parts List

• Graco 25M032 ToughTek P30HT Bare Rotor Stator Pump System, 230V, 30A, 1Ph
• Graco MTA824 Hopper Assembly Kit for P Systems
• Graco MTA751 90mm Pump Assembly Kit
• Graco MTA753 113mm Pump Assembly Kit, Black
• Graco/Airlessco 15H108 LABEL, warning, pinch point
• Graco MTA675 Drive Shaft Kit for P-20 / P-30 Pumps
• Graco MTA727 Single Phase Power Harness Kit
• PLUG,FEMALE, 30A 250VAC

Specifications