Graco MTA728 Three Phase Power Harness Kit

Genuine Graco MTA728 is the three phase power harness (power cable) for ToughTek mixing and pumping equipment. It is used on the MP-40 mixing pump, the CM-40 and CM-40 Silo continuous mixers, and the P-40 pump.

Features

• Three phase power harness, listed as ref. 56 on the MP-40 and ref. 10 on the CM-40 Series
• Qty. 1 per system
• Plug only is sold separately as MTA935
• MTA851 is the separate cable for the 380V MP-40
• Made in the US

Fits These Graco Models

• ToughTek MP-40 mixing pump, systems 25M062 and 25M066 (manual 3A4349)
• ToughTek MP-Series pump system 25M072 (manual 3A4789)
• ToughTek CM-40 Series continuous mixers, models 25M082 and 25M083 (manual 3A4350)
• ToughTek CM-40 Silo Series, model 25M087 (manual 3A4350)
• ToughTek P-40 pump, system 25M050 (manual 3A4361)

Service Notes

• Power Cable MTA728 wire colors: Line 1 black, Line 2 white, Line 3 red, ground green (Graco manual 3A4349).
• The equipment must be grounded to reduce the risk of static sparking and electric shock (Graco manual 3A4350).

Where It Is in the Graco Manual

• Item 56, page 30 of Graco manual 3A4349 (highlighted in the photo above)
• page 42 of Graco manual 3A4349 (42 3A4349M Power Cable (Ref. 56) MTA727 (for MP-20, MP-20 16A). MTA007)
• Item 10, page 19 of Graco manual 3A4350 (CM-40 Series)

Other Parts on the Same Graco Parts List

• Graco MTA708 MP-20 Single-Phase Enclosure Kit
• Graco MTA709 MP20 Single-Phase 16A Enclosure Kit
• Graco MTA710 MP-40 3-Phase Enclosure Kit
• Graco MTA804 Water Hose Assembly Kit
• Graco MTA712 Drive Shaft Assembly Kit for MP-20
• Graco MTA713 Drive Shaft Assembly Kit for MP-40
• Graco MTA729 MP-40 Motor Kit, 3-Phase, 60 Hz
• Graco 126833 SCREW,SHOULDER,SOCKET HEAD

Specifications