Graco MTA680 5.5 kW Motor Assembly Kit for P-30X

Genuine Graco MTA680 is the 5.5 kW motor assembly kit for the ToughTek P-30X HT pump. It is listed in the P-30X parts list and among the P-30X motor kits in the P-Series pump manual.

Features

• 5.5 kW SEW motor assembly
• Complete assembly including motor flange adapter, auger/pump adapter and 30 in. motor power cable
• For the P-30X HT (25M041)
• Motor-only kit is MTA767

Fits These Graco Models

• ToughTek P-30X HT pump (25M041)

What's in the Kit

• 1 x MOTOR, gearbox, 5.5 kW, sew-euro 124
• 1 x ADAPTOR, motor flange (MTA019)
• 1 x SEAL, grease, shaft, motor
• 4 x PIN, 3/16 diameter 3/8 dowel
• 1 x FLANGE, motor, machined
• 1 x FITTING, nipple, grease, 90°, 1/4 in. (MTA355)
• 4 x SCREW, flange, hex, 5/16-18 x 1.25
• 1 x KEY, custom, sew
• 1 x SPACER, custom, sew (MTA364)
• 1 x ADAPTOR, auger/pump (MTA014)
• 2 x SCREW, set 1/4-20 x 0.25 soc cup
• 1 x FITTING, cbl, strain relief, 3/4 npt
• 1 x CABLE, power, motor, 30 in. (MTA785)

Where It Is in the Graco Manual

• Item 15, page 28 of Graco manual 3A4361 (highlighted in the photo above)
• page 29 of Graco manual 3A4361 (Ref. Part Description Qty.)

Other Parts on the Same Graco Parts List

• Graco MTA753 113mm Pump Assembly Kit, Black
• Graco MTA675 Drive Shaft Kit for P-20 / P-30 Pumps
• PIN,SNAP,3/8 X 3
• Graco 115942 Flange Head HEX Nut
• Graco MTA682 Control Enclosure Kit for P20/P30X
• Graco MTA761 P-30 HT Control Enclosure Kit
• Graco MTA915 Control Box G Label
• Graco/Airlessco 15H108 LABEL, warning, pinch point

Specifications