40:1 Bare Wall-Mount Pneumatic Airless Sprayer - Graco King PC XL40-180 K40PW0

Genuine Graco K40PW0 is a King PC 40:1 pneumatic airless sprayer package on a wall-mount frame, supplied bare with no gun or whip hose. It pairs an XL3400 air motor with a 180cc Endurance ProConnect lower and a 55-gallon suction set for spraying paints and primers.

Features

• 40:1 ratio: XL3400 air motor with 180cc ProConnect lower (2013812)
• Maximum working pressure 3800 psi (26.2 MPa, 262 bar); maximum air inlet 150 psi
• 1-1/4 in. fluid inlet; single-leg wall-mount design with wall bracket (24X181)
• 55-gallon suction set with 10 ft suction hose
• Sprayer only: no gun or whip hose included

Fits These Graco Models

• King PC wall-mount spray package, 3800 psi series (K40PW0)

What's in the Kit

• 1 x DRIVER, see Driver Parts List (P34PC1)
• 1 x BRACKET, wall (24X181)
• 1 x LOWER, Endurance ProConnect, 180 cc (2013812)
• 1 x HOSE, suction, 10 ft. 1 1/4 in. npsm (25F045)
• 1 x COUPLING, pipe, 1 in. (116967)
• 1 x TUBE, intake (195151)
• 1 x STRAINER, inlet (181072)
• 1 x HOSE, coupled, 12 in. (17V125)
• 6 x WASHER, lock, 3/8 in.
• 4 x SCREW, 3/8-16 x 1 in.
• 2 x NUT, full hex, 3/8-16
• 1 x MODULE, air, wall mount, 3/4 in. (2014236)
• 2 x SCREW, cap, flange head, 3/8-16 x .875
• 1 x VALVE, safety, 110 psi (113498)
• 1 x LABEL, safety (17A366)
• 1 x LABEL, safety, motor (15F674)
• 1 x LABEL, safety, warning (290079)

Where It Is in the Graco Manual

• page 55 of Graco manual X040210 (P A R T S L I S T REF. PART DESCRIPTION QTY. K40PW0 K40PW1)
• page 61 of Graco manual X040210 (P A C K A G E S W I T H 1 4 5 C C L O W E R S 2 0 1 3 2 3 2 ( 9 0)

Other Parts on the Same Graco Parts List

• Graco 24X181 Wall Bracket Kit, XL
• Graco 116967 Compression Spring
• Graco 195151 Intake Tube
• Graco 181072 - 1" Female Q Strainer
• Graco 17V125 LSR HOSE,COUPLED,12.0
• Safety Valve
• Graco Xtreme-Duty Airless Whip Hose, 6 ft. x 1/4 in x 4500 PSI
• Graco 162505 Fitting, Union, Swivel

Specifications