Not the Graco FinishPro sprayer part you're looking for?
Browse all Graco Replacement Parts for FinishPro Sprayers →
Feel free to call or chat with us for recommendations.
📦
Ships in 1-2 weeks, shipping times may vary
🚚
Free Shipping on orders $500 and up., some items have a optional lift gate for a additional fee
Flat rate of $12.50 for orders below $500.
Click here for more info.
Flat rate of $12.50 for orders below $500.
Click here for more info.
🔁
30-day returns. Click here for more info.
Genuine Graco 288842 is a replacement control board kit. It goes in FinishPro 395 sprayers and FinishPro II 395 compressors. It is the board specified for certain models in each line.
Features
- Control board repair kit
- Qty 1 per sprayer or compressor
- Specified for FinishPro 395 models 255111, 255113 and 255117
- Specified for FinishPro II 395 models 24U067, 24U069 and 24U071
- Also listed in Graco's thermal pad installation instructions for control boxes
- Shipping weight 0.65 lbs
Fits These Graco Models
- FinishPro 395 Sprayers (255111, 255113, 255117)
- FinishPro II 395 Compressors (24U067, 24U069, 24U071)
- Control boxes covered by the thermal pad repair installation instructions
Service Notes
- Before installing a control board, check whether a thermal pad is already installed inside the empty control box (Graco manual 3A9242).
- If a thermal pad is already installed, refer to the relevant control board or operation manual (309709, 309674 or 333126) for the steps to install the control board (Graco manual 3A9242).
- If no thermal pad is installed, follow the thermal pad installation steps in the instructions, starting at step 2 (Graco manual 3A9242).
Where It Is in the Graco Manual
- Item 49, page 4 of Graco manual 312100 (highlighted in the photo above)
- Item 288842, page 6 of Graco manual 312100 (FinishPro 395 Sprayers 6 FinishPro 395 Sprayers Ref. Part Description )
- Item 288842, page 7 of Graco manual 333154 (Ref. Part Description Qty.)
- page 1 of Graco manual 3A9242 (3A9242A EN Repair Thermal Pad Installation Instructions)
Other Parts on the Same Graco Parts List
- Graco 107434 Thrust Bearing
- Graco 117828 Encapulated PTFE O-Ring Kit
- Graco 111457 O-ring Packing
- Graco 111600 - Grooved Pin
- Graco 115522 SCREW, MACH, PNH
- Graco 115494 SCREW, MACH.,PHILLIPS, PAN HD
- Graco 115498 SCREW
- Graco 116073 WASHER For Thrust
Specifications
| Part Number | 288842 |
| UPC | 00633955227033 |
| Height | 2.3 IN |
| Length | 5.8 IN |
| Width | 4.2 IN |
| Shipping Weight | .65 LBS |