Graco 26C427 PressureTrak Kit for XP50, XP70 and XL6500

Genuine Graco 26C427 is the XL6500 PressureTrak kit. It monitors pressures to provide ratio assurance on Graco XP plural-component sprayers. Graco's XP manual specifies it for the XP50 and XP70 models.

Features

• PressureTrak monitor for ratio assurance on XP plural-component systems
• Specified for XP50 and XP70 proportioners
• Listed as the XL6500 PressureTrak Kit
• Acceptable for use in explosive atmospheres

Fits These Graco Models

• XP50 and XP70 Proportioners
• XL6500 air motor

Service Notes

• The PressureTrak alarms and shuts down if it detects A or B fluid pressure above the maximum working pressure; Setup Mode can be used to lower the maximum pressure set point (Graco manual 3A3320).

Where It Is in the Graco Manual

• Item 21, page 26 of Graco manual 3A3320 (highlighted in the photo above)
• Item 100, page 61 of Graco manual 3A0420 (3A0420ZAN 61 ▲ Replacement safety labels, tags, and cards are availabl)
• page 75 of Graco manual 3A0420 (3A0420ZAN 75 PressureTrak Kit (26C426 - XP35, 26C427 - XP50/XP70) WL)
• page 81 of Graco manual 3A0420 (Accessories and Kits 3A0420ZAN 81 Accessories and Kits Acceptable For )

Other Parts on the Same Graco Parts List

• Graco 110755 Plain Washer
• Graco WASHER, LOCK
• Graco 104429 SCREW CAP HEX HD
• Graco 273094 Hose Heater Kit, 240V, Hazardous Locations (Packaged)
• Graco 273095 Hose Heater Kit, Non-Hazardous Locations, 240V (Packaged)
• Graco 273102 480V Heated Hose Heater Kit, Non-Hazardous Locations (Packaged)
• Graco 113796 HD Hex Flange Screw
• Graco 115942 Flange Head HEX Nut

Specifications