Graco 25D852 6 in. Stucco Applicator with Camlock

Genuine Graco 25D852 is a Pole Spray Applicator with a 1.5 in. female camlock connection, listed as Model 25D852, Series A. It applies water-based stucco base and finish coat materials and Exterior Insulation and Finish Systems (EIFS). It is used with Graco ToughTek pumps and systems.

Features

• 6 in. stucco applicator with swivel
• 1.5 in. female camlock inlet
• 600 psi (4.13 MPa, 41.3 bar) maximum fluid working pressure
• 100 psi (0.69 MPa, 6.9 bar) maximum air pressure
• Includes 5/8, 11/16 and 3/4 in. orifice tips
• Professional use only; not approved for explosive atmospheres or hazardous locations

Fits These Graco Models

• Graco Pole Spray Applicator for ToughTek pumps and systems (Model 25D852, Series A)

What's in the Kit

• 1 x APPLICATOR, stucco, 1-1/4 in. x 6 in. with swivel (128737)
• 1 x FITTING, line air (169967)
• 1 x FITTING, coupling, qd, 1/4 in. (17H021)
• 1 x TIP, 5/8 in. orifice stamped (128462)
• 1 x TIP, 11/16 in. orifice stamped (128463)
• 1 x TIP, 3/4 in. orifice stamped (128464)
• 1 x CAP, retaining, nozzle, medium (16A405)
• 1 x STRAP, retaining (114271)
• 1 x FITTING, nipple, 1.25 npt (C20490)
• 1 x FITTING, 1.5 in. camlock f x 1.25 npt m (128477)

Where It Is in the Graco Manual

• Item 1, page 5 of Graco manual 3A3438 (highlighted in the photo above)
• page 1 of Graco manual 3A3438 (WL E 3A3438D Operation)

Other Parts on the Same Graco Parts List

• Graco 128737 APPLICATOR,STUCCO,1-1/4"X6"W/SWIVEL
• Air Line Quick Disconnect Pin Fitting, 1/4 npt(f)
• Graco 17H021 FITTING,COUPLING, QD, 1/4"
• Graco 17N894 KIT,COUPLING,35F X 1.25BSPP F
• Graco 128462 TOUGHTEK TIP,5/8" ORIFICE STAMPED
• Graco TOUGHTEK TIP,11/16 ORIFICE STAMPED
• Graco 128464 TOUGHTEK TIP,3/4" ORIFICE STAMPED
• Graco 16A405 CAP, RETAINING, NOZZLE, MEDIUM

Specifications