Graco 256460 B-Side Ball Valve Kit (Resin)

Genuine Graco 256460 is the resin-side (B-side) ball valve for Graco dispense guns. It is the counterpart to the ISO-side ball valve 256459. Graco lists it for the Fusion CS spray gun and the Probler P2 and P2 Elite dispense guns.

Features

• Resin (B-side) ball valve
• Pairs with ISO-side ball valve 256459
• Quantity of 1 per gun in the parts lists
• Listed as a poly ball valve in the P2 Elite manual
• Also appears in the Probler P2 static mixer conversion kit (2 used)

Fits These Graco Models

• Fusion CS Spray Gun
• Probler P2 Dispense Gun
• Probler P2 Elite Dispense Gun

Service Notes

• At daily shutdown, turn the ball valves (256459, 256460) off and trigger the gun 5 to 6 times to purge residual pressure (Graco manual 313266).
• To check the material valves (256459, 256460) for leaks, turn both off, disengage the piston lock, and trigger the gun several times. If additional material is purged, the valves are leaking (Graco manual 313266).

Where It Is in the Graco Manual

• Item 74, page 26 of Graco manual 313213 (highlighted in the photo above)
• Item 1h, page 39 of Graco manual 312666 (▲ Replacement Danger and Warning labels, tags, and cards)
• page 27 of Graco manual 313213 (313213ZAE 27 ✚ Available in bulk kits. See Kits, page 31. ❖ 100 mesh f)
• Item 256460, page 30 of Graco manual 313213 (Optional Configurations 30 313213ZAE Conversion Kits Static Mixer Kit )

Other Parts on the Same Graco Parts List

• Graco/Airlessco 100139 PLUG, pipe
• Graco 117634 SWIVEL UNION NO #6 JIC
• Graco 117635 SWIVEL UNION
• Graco 15U395 ADAPTER MALE X FEMALE 1/8 NPT
• Graco 118123 SCREW, SET, SOCKET W/PATCH
• Graco KIT, REPAIR,#012 O-RINGS
• Graco 257425 Kit, O-Ring, 6 Pack
• Graco PIN, PIVOT

Specifications