Graco 24V671 Stainless Steel Displacement Pump Lower

Genuine Graco 24V671 is a stainless steel displacement pump lower that pairs with a Graco air motor. It is rated for a maximum fluid working pressure of 1100 psi (7.5 MPa, 75 bar) and is used with EcoQuip 2 vapor abrasive blast equipment.

Features

• Stainless steel construction
• 1100 psi (7.5 MPa, 75 bar) maximum fluid working pressure
• 120 cc lower size, 2.5 in. (64 mm) stroke
• 3/4 npt (female) fluid inlet, 1/2 npt (female) fluid outlet
• For professional use only

Fits These Graco Models

• EcoQuip 2 vapor abrasive blast equipment
• Stainless Steel 3:1 Pump (manual 333397)
• Stainless Steel 10:1 Pump (25P031)

Service Notes

• Only use with water or water with additives to inhibit corrosion or mold (Graco manual 3A6845).

Where It Is in the Graco Manual

• Item 2, page 9 of Graco manual 333397 (highlighted in the photo above)
• Item 3, page 11 of Graco manual 3A6844 (25P031)
• page 1 of Graco manual 3A6845 (3A6845A EN Instructions Stainless Steel Pump Lower)
• page 13 of Graco manual 3A6845 (Technical Specifications 3A6845A 13 Technical Specifications Stainless)

Other Parts on the Same Graco Parts List

• Graco 17M893 KIT PUMP WATER SST 3:1
• Air Motor, 200 cc displacement, 2.5 in piston diameter, 2.5 in stroke, low noise, compatible with DataTrak with Cycle Count
• Graco 17B185 KIT REPAIR TIE ROD
• Graco 104541 NUT, LOCK
• Graco 121022 1/4 NPT Male Elbow Fitting
• Graco 127846 1/2 Push-to-Connect Elbow Fitting
• Graco EQ1798 3/8 OD X 1/2 NPT Elbow PTC Fitting
• Graco 114499 FITTING ADAPTER

Specifications