Feel free to call or chat with us for recommendations.
📦
Ships in 3-5 days, shipping times may vary
🚚
Free Shipping on orders $500 and up., some items have a optional lift gate for a additional fee
Flat rate of $12.50 for orders below $500.
Click here for more info.
Flat rate of $12.50 for orders below $500.
Click here for more info.
🔁
30-day returns. Click here for more info.
Genuine Graco 24G717 is the toggle switch board kit for the RoadLazer RoadPak line striping system control. It is one of the repair control board kits 24G717 through 24G721 and is listed in the parts list for the programmable skipline controller.
Features
- Toggle switch board (ref. 7), quantity 1
- One of five repair control board kits (24G717 to 24G721)
- Held in place by three screws and lifts off the pin connections
- Installed with toggle switch spacers on the new board
- Grounding strap is provided with the kit
Fits These Graco Models
- RoadLazer RoadPak Line Striping System, control box
- Programmable Skipline Controller for RoadLazer RoadPak Line Striping System
Service Notes
- Use the provided personal grounding strap when removing the cover, to avoid damaging the electronic components: wrap the first 12 in. around your wrist with the black adhesive inward and attach the copper tape to an electrically grounded surface (Graco manual 3A1301).
- For removal, disconnect the control cable, remove three toggle switch nuts from the control box face and remove the six screws holding the cover (Graco manual 3A1301).
- On installation, install toggle switch spacers on the new board (Graco manual 3A1301).
Where It Is in the Graco Manual
- Item 7, page 14 of Graco manual 3A1215 (highlighted in the photo above)
- page 1 of Graco manual 3A1301 (3A1301B EN Repair Control Board Kits for)
- page 3 of Graco manual 3A1301 (Warnings 3A1301B 3 24G717 Removal 1. Put on the ground strap provided.)
- page 6 of Graco manual 3A1301 (Warnings 6 3A1301B 24G720 Removal 1. Put on the ground strap provided.)
Other Parts on the Same Graco Parts List
- Graco 24F472 ROADPAK & ROADLAZER CONTROL BOX
- Graco 24F469 18-Conductor Control Cable for RoadLazer
- Graco 113617 SWITCH, REMOTE
- Graco 24G720 Display RoadLazer & RoadPak Kit
- Graco 24G719 Power Switch Board Kit
- Graco 24G718 Control Board and Guns Switch Kit
- Graco 24G721 Membrane Switch Kit
Specifications
| Part Number | 24G717 |
| UPC | 00633955606241 |
| Height | 4.9 IN |
| Length | 5.5 IN |
| Width | 6.35 IN |
| Shipping Weight | .38 LBS |