Graco 248829 Air Regulator Kit for Feed Pump

Genuine Graco 248829 is the air regulator kit for a feed pump. It regulates the air supply to the pump. It is used in the Graco Agitator Kit 248824, the Merkur 401 Solvent Flush Kit 248951 and the T2 2:1 Pump Kit 256275.

Features

• Air regulator kit for the feed pump air supply
• Built around a 1/2 in. air regulator (104266)
• Includes a 0-200 psi (0-14 bar) gauge
• Includes a 3/8 npt vented ball valve and a 1/4 npt line air fitting
• Included in the agitator and solvent flush kits

Fits These Graco Models

• Agitator Kit 248824 (Feed and Solvent Flush Kits)
• Merkur 401 Solvent Flush Kit 248951
• T2 2:1 Pump Kit 256275 feed pump kit
• T2 2:1, Husky 515, Husky 716 and Husky 1050 Feed Supply Kits

What's in the Kit

• 1 x 1/2 in. air regulator (104266)
• 1 x ball valve, vented, 3/8 npt (113333)
• 1 x gauge, 0-200 psi (0-14 bar) (101689)
• 1 x pipe nipple, 3/8 npt (156849)
• 1 x swivel union, 3/8 npt(m) x 3/8 npsm(f) (155494)
• 1 x line air fitting, 1/4 npt (169970)
• 1 x pipe bushing, 1/2 x 3/8 npt (100081)
• 1 x pipe bushing, 1/2 x 1/4 npt (100206)

Where It Is in the Graco Manual

• Item 104, page 9 of Graco manual 310863 (highlighted in the photo above)
• page 10 of Graco manual 308167 (10 Model 248829 Ref. Part Description Qty.)
• Item 423, page 12 of Graco manual 310863 (12 Part 248951, Solvent Flush Kit, Merkur 401)
• page 11 of Graco manual 312769 (are used in the T2 2)

Other Parts on the Same Graco Parts List

• Graco 104266 Air Regulator, 1/2(F) Inlet/outlet, 0-250 Psi (0-17 Bar), Zinc Plated
• Graco 113333 VALVE, BALL, VENTED, .375
• Low Pressure Air Gauge, back mount, 0-14 bar (0-200 psi) pressure range
• Graco 156849 Hose Fitting - 3/8 in x 3/8 in
• Graco 169970 Air Line Fitting
• Graco BUSHING, PIPE
• Graco 100206 BUSHING, PIPE
• Graco KIT, AIR SUPPLY, HYDRA CAT

Specifications