Graco 244623 9-Inch Pressure Roller Frame

Genuine Graco 244623 is a 9 in. (22.9 cm) pressure roller frame, Model 244623 Series C. It has a 7/8 in. inlet and takes a 1/2 in. roller cover. It is rated for a maximum working pressure of 3600 psi (24.8 MPa, 248 bar) and is used in Graco pressure roller setups.

Features

• 9 in. (22.9 cm) length
• 7/8 in. inlet with 1/2 in. roller cover
• 3600 psi (24.8 MPa, 248 bar) maximum working pressure
• Wetted parts: FKM, nylon, plated steel, POM, polyethylene, stainless steel
• Graco roller covers listed for this frame: 9 in. x 3/8, 1/2, 3/4 and 1-1/4 in. nap

Fits These Graco Models

• Pressure Roller with 18-16 in. Telescoping Extension (manual 309321)
• Roller Frame Model 244623 Series C (manual 309322)

What's in the Kit

• 1 x CAP, end (245999)
• 2 x DIFFUSER, roller (15B065)
• 1 x CAP, end, includes seal, retainer and o-ring (246277)
• 1 x CLIP, roller (197106)
• 1 x ADAPTER, tube (111612)
• 1 x GASKET (115524)
• 1 x LABEL, instruction (198804)

Where It Is in the Graco Manual

• Item 1, page 4 of Graco manual 309321 (highlighted in the photo above)
• page 1 of Graco manual 309322 (Frame, Roller 3600 psi (24.8 MPa, 248 bar) Maximum Working Pressure)
• Item 10, page 3 of Graco manual 309322

Replaces

• Graco 218935 (discontinued; 244623 is the direct replacement)

Other Parts on the Same Graco Parts List

• Graco EvenFlow Telescoping Roller Assembly
• Graco Telescoping Extensions
• Graco 244825 Telescope Adapter
• Graco 15H622 Non-Metallic
• Graco 107590 9" Pressure Roller Cover, 1/2 in nap (order in min of 4qty)
• Graco 245999 End Cap
• Graco 15B065 Pressure Roller Diffuser (please order in multiples of 2)
• Graco 246277 End Cap for Roller

Specifications