Global Finishing Solutions Paint Mix Rooms

GFS’ galvanized Paint Mix Rooms provide a controlled area for safely mixing paint. Wall panels are fabricated from 18-gauge unpainted galvanized sheet steel, and are pre-punched and companion flanged for easy nut-and-bolt, on-site assembly. Our Mix Rooms also contain a convenient 4 inch deep, built-in containment base for potential spills.

Note: Paint Mix Rooms cannot exceed 150 sq. ft.

SAFE AIR OPERATION
A proven ventilation system, fresh air flows constantly throughout the enclosure to protect personnel from inhaling harmful vapors. To bring fresh air into the Mix Room, air is drawn from outside of enclosure and flows through filters to remove dust and dirt contaminants. The continuously moving down flow of air inside the enclosure forces harmful vapors safely through the exhaust plenum.

SAFE LIQUID GUIDELINES 

The amount of flammable or combustible liquid stored in paint mix rooms must be within the following limits (per NFPA 33):
• Paint Mix Rooms within 6 ft. of the spray area may contain up to 2 gallons per square foot of enclosure floor area but may not exceed 60 gallons (U.S).
• Paint Mix Rooms further than 6 ft. from the spray area may contain up to 2 gallons per square foot of enclosure floor area but may not exceed 300 gallons (U.S.)

ETL AND ETL-C LISTED
Standard GFS’ galvanized Paint Mix Rooms are fully ETL and ETL-C listed to meet all applicable industry safety and performance requirements and facilitate successful inspections.

COMPLETE PACKAGE
Each Paint Mix Room ships with the following:
• One personnel door (3' x 7') with an observation window (18" x 24")
• High-efficiency, T8 fluorescent light fixture(s)
• Heavy-duty, 12" diameter exhaust
• 1/2 hp TEFC motor
• Intake filters, assembly hardware & installation drawings

OPTIONS Quoted Seperately 
• Control panel
• Intake fan
• White pre-coated panels