Collection: Paint Gun Washers & Spray Gun Cleaner Machines

A paint gun washer — also called a spray gun cleaner machine, paint gun cleaning machine, or solvent spray gun cleaner — is a dedicated industrial machine that flushes, brushes, and rinses solvent-based paint out of spray guns in under 60 seconds, then contains and reclaims the used solvent for recycling. Compared to hand-washing over a solvent bucket, a spray gun washer cuts cleanup time by 60-80%, dramatically reduces operator solvent exposure (VOC compliance), captures used solvent for recycling, and eliminates the cross-contamination that plagues high-volume paint shops. This page shows the full PSE catalog of 32 spray gun cleaner machines from three industry leaders: Becca Inc., Herkules Equipment, and Uni-Ram — sold under model prefixes like Becca S-series, Herkules G-series (G100, G200, G415, G550), and Uni-Ram UG-series (UG2000D, UG4000E, UG7500W). Ships direct from each manufacturer. Call (888) 714-1410 or text (833) 670-5756 to talk through sizing or for volume pricing.

Why buy Paint Gun Cleaning Machines from Pittsburgh Spray Equipment

• Financing available — 6/12/24-month terms on machines over $2,500 through our finance partner. Application takes 60 seconds.
• Complete solution — pair any of these spray gun cleaners with a solvent recycler to close the loop on solvent purchase costs and hazardous waste disposal fees. Payback is often under 12 months for high-volume shops.

Manual vs. Automatic Spray Gun Cleaner Machines — which is right for your shop?

Both types clean paint spray guns to the same standard. The choice depends on your gun volume, operator time cost, and whether you want to run other tasks in parallel while a gun is cleaning.

• Manual spray gun cleaner (M-series): Operator flushes the gun through a foot-pedal-activated flow system and brushes it clean in 30-45 seconds. Simpler machine, lower capital cost ($2,600–$7,200), best when cleaning ≤ 10 guns/day or when you want operator hands-on quality control.
• Automatic spray gun cleaner machine (A-series): Operator loads the gun into the manifold, closes the cover, presses start. Machine runs a full flush cycle in ~90 seconds while the operator preps the next gun or handles another task. Higher capital cost ($3,600–$9,400), pays for itself quickly at ≥ 15-20 guns/day. What production body shops and furniture manufacturers run.

Buying guide by paint gun cleaning volume

Solvent, waterborne, and dual-service spray gun cleaners

Most industrial spray gun cleaning machines are designed for solvent-based paint cleanup. For shops running waterborne coatings (increasingly common in auto body per VOC regulations), you'll want a dedicated waterborne machine — cross-contaminating waterborne into a solvent-only machine damages the pump. For shops running both, a dual solvent/water spray gun cleaner (like the Uni-Ram UG5000WHR or Becca dual-service models) eliminates cross-contamination risk in a single machine.

• Solvent-only cleaners — Becca S-series, Herkules G-series (except G550 waterborne), Uni-Ram UG-series solvent models. Best for traditional oil-based, lacquer, and 2K coating shops.
• Waterborne-only cleaners — Herkules G550, Uni-Ram UA400W, UM80WS. Best for auto body shops running waterborne bascoats.
• Dual solvent/water cleaners — Uni-Ram UG5000WHR combo. Best for mixed shops that need both without cross-contamination.

What paint gun cleaner machines actually save your shop

The math is compelling. For a mid-sized paint shop cleaning 15 guns/day with hand-washing over a solvent bucket:

• Time savings: A Becca S10A automatic saves ~30-45 min/day of operator time (that's 2.5-3.75 hours/week of billable operator time reclaimed).
• Solvent savings: Paired with a Becca SC solvent recycler, the same setup captures and reclaims 60-80% of your solvent volume. At $20/gal for solvent and ~40 gal/month spend, that's $500-$650/month back to the P&L.
• OSHA / EPA compliance: Enclosed cleaning cycles reduce operator VOC exposure to well below OSHA PELs, reduce fire risk from open-bucket flammable service, and provide the documentation trail that EPA / state hazardous waste generator programs require.
• Payback period: 8-14 months on a $3,600 automatic spray gun cleaner machine for a shop cleaning 15+ guns/day. Fastest payback among any single capex your paint shop can make.

FAQ — Paint Gun Washers & Spray Gun Cleaner Machines

What is a spray gun cleaner machine and how does it work?
A spray gun cleaner machine (also called a paint gun washer) is a self-contained industrial cleaning system that flushes solvent through a spray gun's fluid passages to remove wet paint before it dries and clogs the gun. Solvent is pumped through the gun in a controlled pattern, cleaned parts are collected in the machine's tank, and used solvent is either drained for disposal or recycled through a paired solvent recycler. Total cleaning cycle takes 30 seconds to 2 minutes depending on machine type.

How much does a paint gun cleaning machine save vs. hand-washing over a solvent bucket?
For a shop cleaning 15 guns/day, an automatic paint gun cleaning machine saves ~30-45 minutes/day of operator time and 40-60% of solvent volume (when paired with a recycler). At $30/hr operator cost and $20/gal for solvent, payback on a $3,600 automatic machine is typically 8-14 months.

Which is the best paint gun washer for high-volume auto body shops?
For collision centers cleaning 20+ guns/day, the Becca S800A Automatic/Manual Deluxe Workstation is the industry standard. Auto mode handles routine flush-and-clean; manual mode is available when a painter wants hands-on control for a delicate or specialty gun. Add the S800A-825125K 2nd Gun kit to double throughput to two simultaneous cleanings.

Can a spray gun cleaner machine handle waterborne coatings?
Most Becca and Herkules G-series spray gun cleaner machines are designed primarily for solvent-based paint. For waterborne cleanup, use a dedicated waterborne machine (like the Herkules G550 or Uni-Ram UA400W) or a dual-service machine (like the Uni-Ram UG5000WHR). Cross-contaminating waterborne into a solvent-only machine can damage the pump.

Do I need an exhaust kit with my paint gun cleaner machine?
Required by OSHA in enclosed booth environments where solvent vapor could accumulate to unsafe concentrations. Standard on the Becca S700M, Becca S800A, Herkules G550, and Uni-Ram UG5000EW workstation models. For smaller machines, add an optional 4-inch or 6-inch exhaust kit if the machine operates inside a paint booth or unventilated area.

What's the difference between manual and automatic spray gun cleaner machines?
Manual machines have the operator flush the gun through a foot-pedal-activated flow (Becca M-series, Herkules G45, Uni-Ram UM80WS). Automatic machines have the operator load the gun into a manifold, close a cover, and press start — the machine runs a full flush cycle unattended in ~90 seconds (Becca A-series, Herkules G100/G415/G210, Uni-Ram UG-series). Manual = cheaper, better for < 10 guns/day. Auto = higher throughput, better for 15+ guns/day.

How much do industrial paint gun cleaning machines cost?
Entry manual machines start at $2,500-$3,000. Mid-range manual with POWERCLEAN pressurized flush: $3,500-$5,000. Entry automatic pressurized: $3,600-$4,500. Full deluxe automatic workstations (Becca S800A, Uni-Ram UG7500E): $7,000-$10,000. Financing available on any machine over $2,500. All prices at PSE ship direct from the manufacturer.

Can I finance a paint gun washer purchase?
Yes. Any spray gun cleaner machine over $2,500 qualifies for 6, 12, or 24-month financing through our finance partner. Application is a quick online form; most approvals come through within an hour. Call (888) 714-1410 for a written quote first, then apply.