Collection: Iwata LPH-80 Spray Guns & Parts

Shop the Iwata LPH-80 (also searched as LPH80), an HVLP gravity spray gun that Iwata describes as perfect for spot repair and touch-up, and for coating hard-to-reach areas. This collection includes LPH-80 guns, nozzle and needle sets, air caps and repair parts from Iwata's LPH-80 spec sheets. Not sure which one you need? Call us at 888-714-1410.

Choosing a nozzle size and air cap

The LPH-80 comes in five nozzle sizes with the standard E2 air cap set (code 93557600) and two wide-fan sizes with the E4 air cap set (code 93662600). Iwata's listed fluid output and pattern width increase with orifice size:

• 0.4 mm (LPH-80-042G, E2): 8 ml/min, 40 mm pattern
• 0.6 mm (062G, E2): 25 ml/min, 60 mm pattern
• 0.8 mm (082G, E2): 45 ml/min, 80 mm pattern
• 1.0 mm (102G, E2): 55 ml/min, 100 mm pattern
• 1.2 mm (122G, E2): 80 ml/min, 120 mm pattern
• 1.0 mm (104G, E4 wide fan): 60 ml/min, 130 mm pattern
• 1.2 mm (124G, E4 wide fan): 75 ml/min, 140 mm pattern

Iwata's figures were tested with 16 sec Ford cup #4 automotive repair paint. Fluid output and pattern width will vary with your material.

Finding the right replacement part

Start with the exploded diagram and parts list in Iwata's LPH-80 spec sheet. Find the part on the diagram, note its Ref. number, then match the Iwata code on the list. For example, Ref. 2 is the air cap gasket (93558600), Ref. 3 is the air cap cover ring (93559600), and Ref. 7 is the needle packing cartridge (93940890). Ref. 4 (nozzle set) and Ref. 5 (needle set) depend on your gun's orifice size, so check the nozzle and needle codes in Iwata's order information. The spare parts list also has the MK5 maintenance kit (2950), the repair service kit (2860, which includes Ref. 7, 10-1 and 21), and test cap gauge sets for E2 (2981) and E4 (2982). Iwata says not to substitute commercial or other parts for Anest Iwata original spare parts.

Why buy from Pittsburgh Spray Equipment

• Technical help by phone: call 888-714-1410 to talk through nozzle sizes, air caps or a part code.
• Financing available on larger orders.
• We reference Iwata's parts diagram Ref. numbers on part listings, so you can match the part to your gun.

FAQ

What is the Iwata LPH-80 designed for?
Iwata lists it as an HVLP spray gun with low operating air pressure, made for spot repair, touch-up and hard-to-reach areas. It is also recommended for UV primers and ceramic coatings.

What is the difference between E2 and E4 LPH-80 guns?
E2 guns (0.4 to 1.2 mm) use air cap set 93557600 and are listed at 0.9 bar / 13 psi atomizing pressure. E4 guns are the wide-fan 1.0 mm and 1.2 mm versions. They use air cap set 93662600 and are listed at 1.0 bar / 14 psi.

Does the LPH-80 come with a cup?
Iwata lists each orifice size both as the gun alone and as a gun with the PCG2D-1 150 ml cup. Check the product title to see which one you are ordering. The gun has a G1/4" air connection and a G1/8" fluid connection.

What spray distance and