Collection: Iwata Eclipse Airbrushes & Parts

Shop Iwata Eclipse airbrushes and the nozzles, needles, heads, caps and repair parts listed in Iwata-Medea's Eclipse instruction manuals. Iwata describes the Eclipse series as multi-purpose, high-flow airbrushes that atomize heavier sprayable mediums, from a controlled fine line to a controlled wide spray. Not sure which model or part you need? Call us at 888-714-1410.

Choosing a Eclipse model

• Iwata Eclipse HP-CS (gravity feed, dual action): E3 head system with a 1/3 oz funnel-shaped cup that is easy to clean up and helps paint flow efficiently. It sprays heavier mediums while keeping high-detail spray characteristics.
• Iwata Eclipse HP-BS (gravity feed, dual action): E3 head system with a 1/16 oz cup. The improved funnel design makes clean-up easy and improves paint flow.
• Iwata Eclipse HP-BCS (siphon feed, dual action): E5 head system, fed from a bottle instead of a cup. Iwata says it sets the industry standard for high-performing, general-purpose, high-paint-flow airbrushes.
• Iwata Eclipse Takumi (side feed, dual action): E3 head system. It comes with a 0.24 oz gravity-assisted cup and adaptor, and a 0.10 oz cup is available separately. Iwata recommends it for users who need a direct line of sight, want multiple cup and bottle options, or spray at odd angles, even upside down.

Finding the right replacement part

Iwata-Medea's Eclipse manuals use numbered callouts. The needle cap is #1, nozzle cap #2, nozzle #4, main lever #12, needle packing screw #14b, needle #17, needle chucking nut #18 and handle #19. Match the part number on the listing to the number in the parts list of the manual for your model. The manual excerpts we work from don't give nozzle sizes, so check the listing's code against your parts list before ordering. The manual says the needle and nozzle are very delicate, so they are the parts to have on hand. If you can't match a code, call us at 888-714-1410.

Why buy from Pittsburgh Spray Equipment

• Technical help by phone at 888-714-1410 when you're matching a model or a part.
• Part numbers and manual links on part listings, so you can check against the Iwata-Medea parts list.
• Financing on larger orders. Ask us when you're building a bigger order.

FAQ

What air pressure does the Eclipse use?
Iwata says working pressures generally run between 25 and 55 psi, and 35 psi or above is preferred to take full advantage of the Eclipse's versatility. Thicker paints and larger amounts of paint generally need higher pressure. Never exceed the 98 psi pressure limit.

How do I clean it between colors?
On the gravity feed and side feed models (HP-BS, HP-CS, Takumi), dump out the excess paint, rinse the cup with the appropriate cleaner and wipe out leftover paint with a paper towel. Then add cleaner to the bottom of the cup and spray until the spray is clear. On the Takumi, also separate the cup from the adaptor and wipe the threads clean. On the siphon-feed HP-BCS, swap in a bottle of cleaning solution and spray until it runs clear. Then spray air until the airbrush sprays dry.

How should I lubricate and care for the needle?
Coat the needle lightly with a high-quality lubricant like Iwata Lube, then wipe it with a soft, clean cloth so a light coat remains. Don't over-lube, because excess lube in the nozzle can cause severe paint flow problems. Don't use light machine oil or WD-40, which can make the needle stick in the needle packing and get into the air system. Never soak the whole airbrush in any liquid.

Why is my Eclipse double-lining, spattering or not spraying?
Iwata's troubleshooting chart lists a loose head cap, a loose nozzle cap, a bent needle, dried paint on the needle tip, and a cracked or damaged nozzle as common causes. Depending on the symptom, the fix is to tighten the head cap with the provided wrench, finger-tighten the nozzle cap or chucking nut, clean the needle or nozzle, or replace the needle or nozzle. If the tip clogs, the cutaway handle lets you free paint clogs without removing the handle and needle.