FREE Shipping On Order Over 80$

RANSBURG A12089-04 Shaping Air Kit Dual Air (Direct Charge) for Use with 30mm Bell Cup Only

RANSBURG A12089-04 Shaping Air Kit Dual Air (Direct Charge) for Use with 30mm Bell Cup Only

Regular price
$15,328.00
Sale price
$15,328.00
Quantity must be 1 or more


RANSBURG A12089-04 KIT, SHAPING AIR, RMA-303, DIRECT CHARGE, 30MM

The combination provides for two air sources to gain better pattern control, eliminates secondary"ghost" pattern, and the ability to penetrate into deep cavities. The first air is connected to the"blue" tubes labeled "SAI" on the tubing bundle.This air exits through an annulus between the outside diameter of the bell cup and the inside diameter of the shaping air manifold. The seondair is connected to the tube labeled "SAI" and is"gray" in color. This air exits a concentric series of holes at the front of the atomizer. This shaping air combination can be used with either the aluminum 30mm bell cup or the Titanium 30mm bell cup. "Air Flow" information can be found in the "Introduction" section of this manual.

 Part# - Description Qty
A11967-00 Outer Shroud 0-1
A12091-00 Shaping Air Ring, 55mm 0-1
A12066-01 Turbine Retaining Ring 1
79001-11 O-Ring 1
79001-37 O-Ring 1
79001-52 O-Ring 1
A12253-00 Set Screw 1

 

Note: A minimum of 70 slpm (2.6 SCFM)should always be kept flowing in the inner shaping air passage to keep the face of the applicator clean during manual cleaning breaks.


;

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods

all other productsbf2023catchallshipnogooglenot canadaROAS 4