The HD-973P by BendPak is a four-post parking lift that offers a cost-effective way to triple the capacity of typical parking areas. Our patent-pending design can be used indoors or outdoors, and this lift allows the storage of three vehicles in a single parking space. The upper platform accommodates vehicles weighing up to 7,000 lbs., and the lower deck heftily handles up to 9,000 lbs. This is the perfect mechanical parking system for sedans, SUVs and full-size trucks.
While triple-stacking parking lifts are incredibly useful tools, most examples of this type of structure are too tall for many shops and garages. That's why we invented the HD-973P. It is an incredibly unique parking lift that fits in more spaces than any other triple-stacker. The secret to its success: Its specially engineered design lacks cumbersome mechanisms that project high over the top of the lift. This eliminates several feet of lift structure while maintaining a safe, stable and revolutionary design.
Proprietary design
Shortened height columns allow this car lift to fit in low ceiling spaces where others systems can’t. Although shorter in stature than most tri-level systems, the lower space still yields a full 70 inches of rise.
Independent platforms
Typical multi-level car stackers include a bottom platform that is suspended from the upper platform via chains or cables—both platforms move simultaneously. This tethered operation results in limited spacing options between platforms, as the distance between platforms is fixed.
The HD-973P features independently operated lifting platforms, permitting varied vehicle heights and spacing in either upper or lower parking spaces. Because the platforms do not have to move in unison with one another, you can now lower the bottom platform without disrupting the overhead vehicle being stored. This allows operators to control one platform at a time. Practically speaking, if you only want to swap out the second-level vehicle, you don't have to lower the top-level vehicle.
Unmatched protection
The patent-pending design of the HD-973P features multi-position safety locks that are spaced just four inches apart. This allows almost unlimited parking height arrangements on either the upper or lower decks. Redundant, anti-fall, spring-loaded safety catches immediately halt downward movement of either platform in the unlikely event of cable failure.
Hydraulic power
A powerful hydraulic cylinder is enclosed underside each platform set and is matched with high-strength lifting cables for simplicity and dependability. The lift can be configured for drive-thru operation, allowing as many as three deep for maximum efficiency and better use of space.
Smarter construction means less cost to you
High-rise parking lifts that can fit three vehicles will inevitably cost more than other lifts. There's simply more steel involved, and larger lifts require additional engineering, all of which gets incorporated in the cost. The HD-973P offsets much of that extra cost because its smart design requires less steel. The end result is an incredibly efficient parking lift that actually saves buyers thousands of dollars while upholding the industry's most rigid safety standards.
Weight-displacing base
Specially designed base frames distribute the load, which makes this unique lifting system suitable for installation on virtually any residential or commercial concrete floor. It can even be installed on asphalt when equipped with concrete footers. The HD-973P may be configured as a stand-alone lift or combined into rows of multiple units.
Who should get this parking lift?
Explore the HD-973P if you need to stack three vehicles in a tight space, or if you want the versatility to vary the parking heights of your second and third-level vehicles. The lift's small footprint and exemplary design makes for an ideal lifting solution in both professional shops and home garages.
Patent Pending - Applied for in the U.S. and Abroad
SpecificationsHD-973P
Perfect for parking, storage and service
7,000 lb. capacity upper deck
9,000 lb. capacity lower deck
Superstructure features durable powder coat finish
Perfect for cars, trucks, and SUVs
Platforms feature full-length aluminum decking
Rugged welded-steel construction
Powerful hydraulic cylinders
Heavy-duty 3/8” lifting cable
Heavy-duty steel construction
Wide base-plate for maximum stability
Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze
Integrated hydraulic flow restrictor provides controlled descent in event of hose rupture
Reliable electric-hydraulic power system
Multi-position safety locks in each column
Automatic safety locks combined with redundant anti-fall devices
Adjustable lock ladders
Independent backup slack-cable safety latches
Push-button pneumatic safety release.
Padded trip bar with limit switch prevents lower vehicle from making contact with upper platform.
Simple controls
Optional drive-thru ramps available
Optional 4,500-lb. air-hydraulic rolling jacks available
Style
Style:
Multi-Level Parking Lift
Top Platform
Lifting Capacity*
7,000 lbs. (3,175 kg)
*Max Capacity / Front Axle
3,500 lbs. (1,588 kg)
*Max Capacity / Rear Axle
3,500 lbs. (1,588 kg)
A - Overall Width
110.5" (2,807 mm)
B - Overall Length
241.5" (6,134 mm)
C - Height of Columns
157.75" (4,007 mm)
D - Drive-thru Clearance
86.5" (2,197 mm)
E - Maximum Rise
138.5" (3,518 mm)
F - Maximum Lifting Height
144" (3,667 mm)
G - Distance Between Columns
100" (2,546 mm)
H - Runway Width
19" (482 mm)
I - Width Between Runways
35" (889 mm) or 41" (1,041 mm)
J - Runway Length
180.25" (4,578 mm)
Min. Wheelbase @ rated Capacity 1
135" (3,429 mm)
Min. Wheelbase @ 75% Capacity 1
115" (2,921 mm)
Min. Wheelbase @ 50% Capacity 1
95" (2,413 mm)
Min. Wheelbase @ 25% Capacity 1
80" (2,032 mm)
Locking Positions
31
Locking Spacing
Every 4" (102 mm)
Lifting Time to Max. Rise
90 seconds
Motor
220 VAC / 60 Hz / 1 Ph
Bottom Platform
Lifting Capacity*
9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle
4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle
4,500 lbs. (2,041 kg)
A - Overall Width
110.5" (2,807 mm)
B - Overall Length
241.5" (6,134 mm)
C - Height of Columns
157.75" (4,007 mm)
D - Drive-thru Clearance
86.5" (2,197 mm)
E - Maximum Rise
70" (1,783 mm)
F - Maximum Lifting Height
75" (1,906 mm)
G - Distance Between Columns
100" (2,546 mm)
H - Runway Width
19" (482 mm)
I - Width Between Runways
35" (889 mm) or 41" (1041 mm)
J - Runway Length
165.5" (4,204 mm)
Min. Wheelbase @ rated Capacity 1
125" (3,175 mm)
Min. Wheelbase @ 75% Capacity 1
105" (2,667 mm)
Min. Wheelbase @ 50% Capacity 1
85" (2,159 mm)
Min. Wheelbase @ 25% Capacity 1
70" (1,778 mm)
Locking Positions
13
Locking Spacing
Every 4" (102 mm)
Lifting Time to Max. Rise
50 seconds
Motor
220 VAC / 60 Hz / 1 Ph
Shipping
Shipping Weight:
5,296-lbs (2,402 kgs)
1The Lift supports less weight than its rated capacity when the vehicle’s wheelbase is shorter; this is because the wheels of such a vehicle are closer to the middle of the Runways, where there is less strength. For example, the maximum weight allowed on the Lift for a vehicle with a wheelbase of 95" is 50 percent of the Lift’s rated capacity (or 3,500 lbs. when the rated capacity is 7,000 lbs.).
Patent Pending - Applied for in the U.S. and Abroad
Shipping Weight:
5,296-lbs (2,402 kgs)
Note: An air supply (minimum: 30 psi / 3 CFM) is may be required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
choosing a selection results in a full page refresh
press the space key then arrow keys to make a selection
Join us and Save 5% on your first order
As a subscriber you will receive the following perks:
- Advanced notice of deals and promotions
- Helpful content on equipment use, selection, and more
- Exciting new product annoucements
How to get 5% off
Just enter your email and will send the coupon code to your email.
Apply that code to receive your discount*
* Promo only valid for first purchase, promo is non transferrable, promo doesn't apply to all items
Join us and Save 5% on your first order
As a subscriber you will receive the following perks:
- Advanced notice of deals and promotions
- Helpful content on equipment use, selection, and more
- Exciting new product annoucements
How to get 5% off
Just enter your email and will send the coupon code to your email.
Apply that code to receive your discount*
* Promo only valid for first purchase, promo is non transferrable, promo doesn't apply to all items
Join us and Save 5% on your first order
As a subscriber you will receive the following perks:
- Advanced notice of deals and promotions
- Helpful content on equipment use, selection, and more
- Exciting new product annoucements
How to get 5% off
Just enter your email and will send the coupon code to your email.
Apply that code to receive your discount*
* Promo only valid for first purchase, promo is non transferrable, promo doesn't apply to all items
Shipping and Returns
Shipping should be simple
We offer free shipping on orders over $80, less than $80 we charge a single flat rate fee of $8.50
Our primary carriers include UPS and USPS and for large items a variety of freight carriers.
Please note for certain product categories particularly filters there is at times an additional charge for shipping.
Shipping policy exceptions
Not all products qualify for free shipping.
No-Hassle Returns
Except as otherwise described below, if you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange (if the product is undamaged). When you make your return, you’ll need to note credit or exchange. Returned items must be in the original packaging. To initiate a return you can contact us via phone and we can coordinate the return with you.
If you have questions please contact us at 866 373 5658
Shipping and Returns
Shipping should be simple
We offer free shipping on orders over $80, less than $80 we charge a single flat rate fee of $8.50
Our primary carriers include UPS and USPS and for large items a variety of freight carriers.
Please note for certain product categories particularly filters there is at times an additional charge for shipping.
Shipping policy exceptions
Not all products qualify for free shipping.
No-Hassle Returns
Except as otherwise described below, if you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange (if the product is undamaged). When you make your return, you’ll need to note credit or exchange. Returned items must be in the original packaging. To initiate a return you can contact us via phone and we can coordinate the return with you.
If you have questions please contact us at 866 373 5658
Shipping and Returns
Shipping should be simple
We offer free shipping on orders over $80, less than $80 we charge a single flat rate fee of $8.50
Our primary carriers include UPS and USPS and for large items a variety of freight carriers.
Please note for certain product categories particularly filters there is at times an additional charge for shipping.
Shipping policy exceptions
Not all products qualify for free shipping.
No-Hassle Returns
Except as otherwise described below, if you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange (if the product is undamaged). When you make your return, you’ll need to note credit or exchange. Returned items must be in the original packaging. To initiate a return you can contact us via phone and we can coordinate the return with you.
