The griphoist®/tirfor® lifting and pulling hoist is safe, reliable and efficient. Suitable for many applications, the griphoist®/tirfor® is a lever-operated wire rope hoist using a separate wire rope. One-man operated, using a telescopic operating handle, it can work in any position and over any height of lift. It can replace conventional winches and other hoists for many applications. Best uses are when doing long pulls or when requirements call for increasing capacity.
It is possible for lifting and pulling applications to increase the capacity of the griphoist®/tirfor® by using multiple sheave blocks without the user being directly in front of load.
Light and compact, the griphoist®/tirfor® T500 series is easy to handle, provides a high mechanical advantage and is economical.
MULTIPLE OPERATION
- Works in any position: horizontal, vertical or angled
- Unlimited length of wire rope
- Increase the nominal capacity with multiple sheave blocks
- Long length of wire rope much easier to handle than chain
SIMPLE
- Fast and easy installation and use
- Simple to install or remove the wire rope
- Continuous operation without jerking
- Reduced maintenance with simple cleaning and regular lubrication
- Change from forward to reverse operation by transferring the operating
- handle from one lever to another
HEAVY DUTY
- High mechanical advantage
- Both ranges will operate in the most difficult conditions
- SAFE AND RELIABLE
- The load is always permanently controlled in the utmost precision:
- when operation stops, the load is distributed on two jaw blocks
- TU range “UL” classified for man-riding applications for use as a scaffold hoist
- Each hoist is equipped with overload shear pins
APPLICATIONS
- Construction
- Public works
- Civil engineering
- Bridges
- Steel structures
- Industry
- Escalators, elevators
- Electricity and telecommunications
- Oil and chemical industries
- Entertainment
Optional swivel hook
Note: Wire reeler is sold separately
Dimensions (inches)
A | B | C | D | E | F | G | H | I | J | K | L | M |
2-9/16 | 15/16 | 4 | 16-1/2 | 2-1/2 | 6-1/2 | 9-7/8 | 5/8 | 3-7/8 | 2-3/8 | 1-3/8 | 15-15/16 | 27-3/16 |
MODEL | T508D |
Nominal capacity | 2,000 lbs. |
Wire rope dia. | 5 ⁄16 in. |
Effort on control lever - Forward | 77 lbs. |
Effort on control lever - Reverse | 27 lbs. |
Rope Travel - Forward | 113⁄16 in. |
Rope Travel - Reverse | 21 ⁄2 in. |
Min. wire rope breaking strength | 10,000 lbs. |
Wire rope weight | 200 ft. |
Unit weight | 14.25 lbs. |
Replacement Handle | 11338 |
Shear pin (Pack of 10) | 29506 |