CLEMCO MODEL 1028 HP COMPLETE PACKAGE
CLASSIC BLAST MACHINE PACKAGES WITH APOLLO LP
High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.
Requirements for Operation
These items are required but not included with this equipment:
- Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
- Minimum of 50 psi needed to close the pop-up valve and pressurize the blast machine.
- OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized.
- NIOSH-approved, type CE, supplied-air respirator.
- Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
- Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
- Appropriate blast suit, work boots, hearing and eye protection.
Description of Operation
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.
Advantages
- Yard portable, industrial-quality blast machines manufactured to ASME code.
- 1-1/4-inch piping allows up to 50 percent more air flow when compared with 1-inch piping.
- Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
- FSV abrasive metering valve maintains smooth, consistent, adjustable media flow. Model 2443 Lo-Pot has a LPV abrasive metering valve.
Includes
- TLR-50 remote controls (includes 10565 RLX handle) 02518
- MSV 1/2” abrasive metering valve 01247
- 25 ft. X 1/2” ID blast hose, coupled 01268
- CHE-1/2 aluminum nozzle holder (included in 01268) 00577
- CQA-1/2 aluminum quick coupling (included in 01268) 00599
- Blast hose safety cable 15012
- 1/2” Air filter with manual drain 01308
- CT-4 blast nozzle 01353
- Blast machine screen (optional steel cover) 03362 (03107)
- Nylon tie (eight included with system) 02195 (each)
- Apollo 20 HP DLX helmet with Constant Flow Connector 20975
- 25 ft respirator hose 04397
- CPF-20 Breathing air filter 03578
- One pair leather gloves 02243
- One 25-pack Apollo 20 outer lens 21411
- One 10-pack quick coupling gaskets 00850
- One 10-pack nozzle washers 21580
- Outlet valve diaphragms (three included with system) 02511 (each)
The MSV is a manual valve suited for expendable media; it is used on our 1/2-
and 1-cubic foot machines.
(-) MSV Metering Valve .... 01247
1. MSV top casting ............ 01258
2. Gasket, valve body........ 01260
3. Metering plate & stem ... 01261
4. O-ring............................. 00794
5. Pin, spring...................... 01263
6. Washer, nylon................ 01266
7. MSV bottom casting ...... 01259
8. Spring, 17/32” OD X 1”.. 02178
9. MSV Handle................... 01262
10. Cap screw, 5/16-NC x 1-3/4”.... purchase locally
11. Nut, 5/16-NC hex... purchase locally
Approvals and Certifications
Clemco's quality management system is ISO 9001-2008 certified.
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 150-psi working pressure. Vessel is hydrostatically tested and National Board-certified.
Remote control system complies with OSHA regulation 1910.244 (b).