APEX 60-inch Lightweight Foam Trailer Ramp Kit - Set of 2 (5174157)

Very Low Cars Finally Get a Friendlier Trailer Ramp

The APEX 60-inch Lightweight Foam Trailer Ramp Kit is built for vehicles that need more than a small approach-angle correction. If your car barely clears speed bumps, wears an aggressive splitter, or has a deep front lip that makes trailer loading feel risky, these ramps extend the trailer path and create a longer, more controlled climb onto the deck.

With a 60-inch length, 7-inch rise, and 6.6-degree approach angle, this set is made for serious street builds, track cars, long-wheelbase performance vehicles, and low-clearance cars that struggle with typical trailer doors. Instead of inching forward over improvised boards, you get a purpose-built ramp pair that makes loading feel repeatable.

60 Inches of Controlled Trailer Transition

The added ramp length spreads the loading transition over more distance, which is exactly what low cars need. As the front tires roll up, the chassis rotates gradually instead of being forced over a sharp hinge point at the trailer door. That smoother arc helps protect front lips, splitters, exhaust, and other vulnerable low-mounted components.

The 7-inch height works with the 60-inch profile to create a more usable trailer approach for vehicles that sit too low for shorter helper ramps. For drivers hauling cars to track days, tuning shops, or events, that consistency can take a lot of stress out of every load-in and load-out.

Solid Structural Foam Core with Reinforced Trailer Shelf

Inside each ramp is a high-density structural foam core engineered to carry vehicle load through the full body of the ramp. It is not hollow plastic and not a thin shell over empty space. Under the tire, the ramp feels solid and planted while staying light enough for one person to carry and position.

The trailer interface is strengthened to help keep the door contact zone square and stable after repeated loading cycles. That reinforced shelf helps preserve the ramp profile over time so the approach angle remains consistent from one weekend to the next.

Durable Polyurea Shell for Grip and Long-Term Use

Each 60-inch ramp is fully encapsulated in a rugged polyurea coating that helps resist abrasion, impact, UV exposure, chemicals, and regular trailer abuse. The micro-textured surface improves traction at the tire and trailer interface, helping the ramp stay controlled during drive-on loading.

Integrated carry zones make the ramps easy to move, load, and store without loose handles or hardware. With no metal edges to rust or scratch finished surfaces, the 60-inch APEX trailer ramp kit gives serious users a cleaner, lighter, more professional alternative to stacked lumber and improvised blocks.

Longer Ramp for Lower Cars

The 60-inch length gives low vehicles more room to climb gradually. It is made for cars that need more help than a compact trailer ramp can provide.

7-Inch Rise

A taller 7-inch rise helps bridge difficult trailer-door transitions. Paired with the ramp length, it creates a more controlled path onto the deck.

6.6-Degree Approach

The 6.6-degree angle helps protect aggressive splitters, low lips, and long overhangs. It turns a stressful loading point into a smoother run-up.

Solid Foam Construction

The high-density structural foam core distributes weight through the ramp body. It stays light enough to handle while feeling stable under load.

Reinforced Interface Zone

The strengthened trailer shelf helps keep the contact point square and stable. That matters when the ramp is used again and again.

Molded Carry Zones

Integrated carry zones give you a secure place to grab each ramp. One person can move, place, and store the pair without a wrestling match.

Features

• 60-inch ramp length for a longer trailer approach
• 7-inch rise for added trailer-loading correction
• 6.6-degree approach angle for aggressive splitters and low front lips
• Built for enclosed and open trailer loading
• High-density structural foam core
• Solid-core design resists sagging, crushing, and taking a set
• Fully encapsulated polyurea shell
• Micro-textured anti-slip surface
• Abrasion, UV, chemical, and impact resistance
• Strengthened trailer interface shelf
• Lightweight enough for one-person positioning
• Integrated molded carry zones
• No metal to rust or scratch finished floors
• Sold as a matched pair
• Instructions with placement diagrams and safety guidelines

Specifications

Manuals & Downloads

• APEX Lightweight Foam Trailer Ramps Sales Sheet
• APEX Trailer Ramps Quick Start Guide
• APEX Limited Warranty All Products