Binks 2.8 Gallon Pressure Pot (tank outfit) and Spray Gun Combos
Collection: Binks 2.8 Gallon Pressure Pot (tank outfit) and Spray Gun Combos
Binks 2.8 gallon pressure pot tank outfits deliver professional-grade fluid delivery for automotive, industrial, and finishing applications. These spray gun and pressure tank combos are engineered for consistent atomization and coating control across multiple spray methods—conventional, HVLP, and LVMP. Whether you're spraying basecoats, clearcoats, or industrial finishes, a complete binks pressure pot system eliminates compatibility guesswork and reduces setup time on the job. Our selection includes conventional spray guns paired with zinc-plated tanks, advanced HVLP systems with dual regulation, and Trophy-series outfits built for high-volume production environments. Choosing the right binks spray pot configuration depends on your fluid type, application method, and production volume.
How to Choose the Right Binks 2.8 Gallon Pressure Pot (tank outfit) and Spray Gun Combos
- Tank capacity: 2.8 gallon or 2 gallon size for your job duration and material batch requirements.
- Spray gun type: Conventional, HVLP, or LVMP—verify your air compressor CFM matches the gun's demand.
- Pressure regulation: Single or dual-regulated systems; dual regulation isolates fluid and atomizing air independently.
- Tank material: Steel (magnetic) vs. zinc-plated construction for corrosion resistance and fluid compatibility.
- Fluid hoses included: Verify length, diameter, and quick-disconnect fittings match your spray booth layout.
- Fluid delivery method: Gravity-fed vs. pressure-fed; pressure systems work uphill and in tight spaces.
- Material compatibility: Confirm tank and gun components handle your specific coatings—lacquer, urethane, acrylic, or industrial enamels.
Model Comparison
| Model | Tank Size & Material | Spray Gun Type | Regulation System | Included Hoses & Fluid Cup |
|---|---|---|---|---|
| Binks 98C-357 2100 Conventional | 2.8 gal, steel tank | Conventional siphon | Single regulation | Standard hose set, 1 qt cup |
| Binks 98-3156 Trophy Air HVLP | 2.8 gal, zinc-plated | Trophy HVLP | Dual regulated (fluid & air) | Hose assembly, accessory pack |
| Binks 98-3157 Trophy LVMP | 2.8 gal, steel tank | Trophy LVMP | Single regulation | Complete hose set, fluid cup |
| Binks 98-3163 FLG HVLP | 2 gal, standard steel | FLG HVLP | Dual regulated | Full hose assembly included |
| Binks 98-3144 2 Gallon Advanced HVLP | 2 gal, steel tank | Advanced HVLP | Dual regulation | Hose set, fluid delivery cup |
Frequently Asked Questions
What's the difference between HVLP and conventional spray guns on a binks pressure pot?
HVLP (High Volume Low Pressure) uses 10 PSI or less at the cap, reducing overspray and material waste—ideal for finish work. Conventional guns operate 25–40 PSI, delivering higher transfer efficiency for heavier coatings and faster coverage. Choose HVLP for precision; conventional for production speed and thick-film applications.
Do I need dual regulation on my binks pressure tank outfit?
Dual regulation (separate fluid and atomizing air controls) gives you independent adjustment of spray pattern and fluid flow. Single-regulated systems tie both functions together, limiting flexibility. Dual regulation is worth the upgrade if you spray multiple fluid types or need fine-tuned atomization for clear coats and repairs.
What CFM does my air compressor need for a binks 2.8 gallon pressure pot?
Conventional guns typically need 8–12 CFM at 25–35 PSI. HVLP guns demand 10–15 CFM at 10 PSI. Check your specific gun's nameplate, then verify your compressor delivers that CFM at your operating pressure. Undersized compressors cause pulsing, poor atomization, and incomplete jobs.
Can I use the same binks pressure pot for lacquer, urethane, and water-based coatings?
Yes, but flush thoroughly between material types. Steel tanks are compatible with most industrial coatings. For water-based fluids, ensure all gaskets and seals are compatible—some older Binks tanks may have cork gaskets that swell in water. Check your tank's parts list or contact our support team before switching fluid types.
Are replacement parts (gaskets, spray guns, regulators) available for older binks pressure pot outfits?
Yes. Binks has maintained strong backward compatibility. Gaskets (like the QMS-80-1 for 2-gallon tanks), regulator cartridges, and gun components are stocked as separate items. We carry legacy and current-production parts—verify your tank's serial number or model code, and we'll source the exact replacement you need.
