FREE Shipping On Order Over 80$

Fusor® 129 2-Part Fast Controlled Flow Seam Sealer, 7.1 oz Cartridge, Paste, Tan, 1 hr Curing
Fusor® 129 2-Part Fast Controlled Flow Seam Sealer, 7.1 oz Cartridge, Paste, Tan, 1 hr Curing

Fusor® 129 2-Part Fast Controlled Flow Seam Sealer, 7.1 oz Cartridge, Paste, Tan, 1 hr Curing

Regular price
$74.74
Sale price
$74.74
Quantity must be 1 or more


Product Description

Fusor® 129 controlled flow sealer is a two-component, epoxy-based seam sealer used for duplicating factory appearance on roof channels, door seams, drip rails, trunk seams and truck bed floor seams. Fusor 129 seam sealer is fast curing and bonds extremely well to painted and two-component primed surfaces. Sealer can be applied directly to bare metal on rigid joints, however flexible joints, such as roof seams and drip rails, should always be primed.

Features

  • High performance - provides excellent adhesion to bare or primed surfaces
  • Versatile, bonds to epoxy or urethane two-component primed surfaces
  • Weld through with minimal burn back, tolerates 4 deg F (24 deg C) powder coating cure for 3 min
  • Excellent appearance easily duplicates factory appearance provides extremely flexible seal with no shrinkage, cracking or sagging
  • Provides extremely flexible seal with no shrinkage, cracking or sagging, applies in smooth continuous beads with no gun lines
  • Environmentally-resistant - provides excellent corrosion protection
  • Easy to finish, can be tooled, but is not required for factory look, cured sealer may be sanded to a feather edge

Specifications

More Information
Part No. 90961
Product Line FUS
Standard/Approvals GHS Hazard
Application For duplicating factory appearance on roof channels, door seams, drip rails, trunk seams and truck bed floor seams
Manufacturer LORD Fusor Adhesives
Alternate Part Number-1 90961
UPC 666233909611
Brand Fusor®
Maximum Sale Quantity 6
Maximum Sale Day 7
Part Status A
Applicable Materials 2K Primer, Bare Metal, Epoxy 2K Chemistry
Composition 5% 1,3-Benzenedimethanamine (Part A), 70 to 75% Polymercaptan, 1 to 5% 1,3-Benzenedimethanamine (Part B)
Application Time 5 to 8 min at 70 deg F
Odor/Scent Solvent
Color Tan
Flash Point 201 deg F
Container Size (oz) 7.1
Container Type Cartridge
Form Paste
Type 2-Part, Fast
Curing Time 1 hr at 70 deg F

;

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods

all other productscanadaImage too smallimageresizelord-fusor-adhesiveslowmarginprisyncrepriceROAS 6.6Ship6to9daysspo-cs-disabledspo-defaultspo-disabledspo-notify-me-disabledunder-200