{"product_id":"binks-14-1-resin-spray-outfit","title":"Binks 14:1 Resin Spray Outfit","description":"\u003ch2 data-path-to-node=\"0\"\u003e\u003cb data-path-to-node=\"0\" data-index-in-node=\"0\"\u003eBinks 14-1 Wet Out Spray System: Maintenance \u0026amp; Safety Guide\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp data-path-to-node=\"1\"\u003eProper upkeep of your Binks 14-1 system is essential for preventing downtime and ensuring a consistent cure in your laminates. Below is a streamlined guide to keep your equipment running at peak performance.\u003c\/p\u003e\n\u003chr data-path-to-node=\"2\"\u003e\n\u003ch3 data-path-to-node=\"3\"\u003e\u003cb data-path-to-node=\"3\" data-index-in-node=\"0\"\u003eDaily Maintenance Checklist\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp data-path-to-node=\"4\"\u003eA few minutes of prevention each day can save hours of troubleshooting later.\u003c\/p\u003e\n\u003cul data-path-to-node=\"5\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"5,0,0\"\u003e\u003cb data-path-to-node=\"5,0,0\" data-index-in-node=\"0\"\u003eCheck the Catalyst Level:\u003c\/b\u003e Never let the catalyst pump run dry. This causes \"soft spots\" in your resin that will not cure.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"5,1,0\"\u003e\u003cb data-path-to-node=\"5,1,0\" data-index-in-node=\"0\"\u003eInspect the Internal Mix Chamber:\u003c\/b\u003e At the end of every shift (or during long breaks), flush the gun thoroughly with a compatible solvent to prevent resin from hardening inside the head.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"5,2,0\"\u003e\u003cb data-path-to-node=\"5,2,0\" data-index-in-node=\"0\"\u003eMonitor Hose Integrity:\u003c\/b\u003e Inspect the \u003cb data-path-to-node=\"5,2,0\" data-index-in-node=\"36\"\u003e50ft hose\u003c\/b\u003e for any kinks, bulges, or leaks. High-pressure resin leaks can be hazardous and messy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"5,3,0\"\u003e\u003cb data-path-to-node=\"5,3,0\" data-index-in-node=\"0\"\u003eLubricate the Pump Packing:\u003c\/b\u003e Apply a few drops of Throat Seal Liquid (TSL) to the resin pump shaft to prevent dried resin from damaging the seals.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-path-to-node=\"6\"\u003e\n\u003ch3 data-path-to-node=\"7\"\u003e\u003cb data-path-to-node=\"7\" data-index-in-node=\"0\"\u003eCritical Safety Protocols\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp data-path-to-node=\"8\"\u003eWorking with pressurized resin and catalysts requires strict adherence to safety standards.\u003c\/p\u003e\n\u003col start=\"1\" data-path-to-node=\"9\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,0,0\"\u003e\u003cb data-path-to-node=\"9,0,0\" data-index-in-node=\"0\"\u003ePressure Relief Procedure:\u003c\/b\u003e Always bleed off the air and fluid pressure before performing any maintenance, changing tips, or disconnecting hoses.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,1,0\"\u003e\u003cb data-path-to-node=\"9,1,0\" data-index-in-node=\"0\"\u003eHandle Catalyst with Care:\u003c\/b\u003e MEKP (Methyl Ethyl Ketone Peroxide) is highly reactive. Always wear chemical-resistant gloves and \u003cb data-path-to-node=\"9,1,0\" data-index-in-node=\"125\"\u003eANSI-approved eye protection\u003c\/b\u003e.\u003c\/p\u003e\n\u003cblockquote data-path-to-node=\"9,1,1\"\u003e\n\u003cp data-path-to-node=\"9,1,1,0\"\u003e\u003cb data-path-to-node=\"9,1,1,0\" data-index-in-node=\"0\"\u003eWarning:\u003c\/b\u003e If catalyst contacts your skin or eyes, flush with water immediately and seek medical attention.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,2,0\"\u003e\u003cb data-path-to-node=\"9,2,0\" data-index-in-node=\"0\"\u003eGrounding:\u003c\/b\u003e Ensure the system is properly grounded to prevent static electricity buildup, which can ignite solvent vapors or resin fumes.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,3,0\"\u003e\u003cb data-path-to-node=\"9,3,0\" data-index-in-node=\"0\"\u003eVentilation:\u003c\/b\u003e Use the system only in a well-ventilated spray booth or area with adequate airflow to manage VOC (Volatile Organic Compound) levels.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr data-path-to-node=\"10\"\u003e\n\u003ch3 data-path-to-node=\"11\"\u003e\u003cb data-path-to-node=\"11\" data-index-in-node=\"0\"\u003eTroubleshooting Common Issues\u003c\/b\u003e\u003c\/h3\u003e\n\u003ctable data-path-to-node=\"12\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSymptom\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePotential Cause\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSolution\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"12,1,0,0\"\u003e\u003cb data-path-to-node=\"12,1,0,0\" data-index-in-node=\"0\"\u003ePulsating Spray Pattern\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"12,1,1,0\"\u003eAir in the resin line or clogged filter.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"12,1,2,0\"\u003eBleed the system and clean the pump intake filter.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"12,2,0,0\"\u003e\u003cb data-path-to-node=\"12,2,0,0\" data-index-in-node=\"0\"\u003eResin Not Curing\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"12,2,1,0\"\u003eCatalyst pump is losing prime or is empty.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"12,2,2,0\"\u003eCheck catalyst levels and ensure the metering pump is engaged.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"12,3,0,0\"\u003e\u003cb data-path-to-node=\"12,3,0,0\" data-index-in-node=\"0\"\u003eGun Leaking at Tip\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"12,3,1,0\"\u003eWorn needle seat or internal seal.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"12,3,2,0\"\u003eInspect and replace the needle assembly or O-rings.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"12,4,0,0\"\u003e\u003cb data-path-to-node=\"12,4,0,0\" data-index-in-node=\"0\"\u003eHeavy Overspray\u003c\/b\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"12,4,1,0\"\u003eAtomization pressure is too high.\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan data-path-to-node=\"12,4,2,0\"\u003eLower the air pressure until you achieve a clean \"wet out\" fan.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Binks","offers":[{"title":"Default Title","offer_id":45414256312511,"sku":"Binks141Resin","price":14385.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0019\/0880\/1571\/files\/IMG_20260326_163812_1.heic?v=1774558119","url":"https:\/\/ca.pittsburghsprayequip.com\/products\/binks-14-1-resin-spray-outfit","provider":"Pittsburgh Spray","version":"1.0","type":"link"}